Freezer Mapping Study Services
From -20 lab freezers to -80 ULTs — a mapping study is how storage claims become storage evidence.
ACS Calibration delivers NIST-traceable, audit-ready freezer mapping study services, available at the ACS central lab or directly on-site at facilities across the Southeast. Temperature from -196 °C to 420 °C, infrared to 500 °C, and humidity from 30 to 75 %RH are on our accredited scope, so ISO/IEC 17025 accredited certificates are available on request.
Temperature & Humidity Instruments We Calibrate
From cryogenic checks to furnace controllers — if it reads degrees or percent RH, we can almost certainly handle it.
Frequently serviced brands: Traceable (Control Company), Gemini Tinytag, T&D, MadgeTech, Fluke, ThermoWorks, LogTag, and ThermoPro — plus dozens more.
Prove the Freezer, Protect the Contents
Laboratory freezers guard samples that are often irreplaceable — enzymes, specimens, cell banks, retains — and “it’s been fine” is not a validation state. A mapping study documents what each shelf and zone actually experiences through compressor and defrost cycles, and where the monitoring probe belongs to catch trouble first.
We conduct freezer mapping studies with loggers calibrated under our accredited temperature capability (to -196 °C), delivering a protocol-driven report with uniformity data, worst-case locations, and recovery behavior. Walk-in freezers and refrigerators complete the cold-storage picture.
What You Get With Every Calibration
- NIST-traceable calibration certificate with real measurement data — not just a pass/fail sticker
- As-found and as-left readings, so drift is documented
- ISO/IEC 17025 accredited certificate with reported uncertainty — on request
- Calibration label with due date, plus a reminder before your next calibration is due
Why Companies Choose ACS for Freezer Mapping Services
NIST-Traceable, Accredited on Request
Every calibration is NIST-traceable with real measurement data. Temperature (-196 to 420 °C), infrared (35–500 °C), and humidity (30–75 %RH) are on our ISO/IEC 17025 accredited scope — accredited certificates available whenever your quality system requires them.
4–6 Business Day Typical Turnaround
Keep production moving. Most instruments are typically completed in 4 to 6 business days from arrival, with rush options available when a line is down.
Flexible Logistics
Mail your instruments in, or schedule onsite calibration and we come to your floor — serving Alabama, Florida, Georgia, Mississippi, Tennessee, South Carolina, and beyond.